Get in touch
Leave your contact details and our team will get back to you, answer your questions and tell you everything you need to know.
MH 150
Feed shredder-mixer-distributor with horizontal augers. Analogue of the ISRK-15 "KHOZYAIN".
Volume 15 m³Model
Payload
5 tAdvantages
-
Available in two versions, with an upper and lower hitch
For compatibility with different tractor models, including MTZ-type tractors
-
Can be used in standard buildings
Compact dimensions matching the tractor's geometry
-
Increased reliability and lower load on the hydraulic motor
Thanks to an autonomous hydraulic circuit
-
Wide-angle PTO shaft with safety and overrun clutches
With a maximum angle of up to 80°
-
Two-speed reduction gearbox
Even in the base configuration it allows four feed-mixing modes (saving time, engine life and 20% fuel)
-
High ground clearance
For operation in adverse road conditions
-
A set of metal extension sides
-
Weighing system on all models in the series
Description
- Description
- Technical data
- Gallery
MH 150 feed shredder-mixer-distributor — an analogue of the ISRK-15 "KHOZYAIN".
A versatile feed mixer for preparing complete feed mixes (CFM) from various components: green mass, silage, haylage, loose and baled hay, straw, compound feed, root crops and liquid feed additives.
Main purpose
The model is developed for large livestock farms. It provides a full work cycle: loading, transport, shredding, mixing and metered feed distribution.
Key advantages
A versatile feed mixer for preparing complete feed mixes (CFM) from various components: green mass, silage, haylage, loose and baled hay, straw, compound feed, root crops and liquid feed additives.
Main purpose
The model is developed for large livestock farms. It provides a full work cycle: loading, transport, shredding, mixing and metered feed distribution.
Key advantages
- High performance. A 15 m³ hopper and a 5 t payload allow up to 1,500 head to be fed per shift.
- Winter operation. An autonomous hydraulic system guarantees reliable operation at temperatures down to −30 degrees.
- Easy maintenance. Improved access to all hydraulic devices and the chain drive simplifies routine work.
- Increased reliability. Reinforced running gear and powerful drive chains ensure a long service life in intensive modes.
- Versatile hitching. Compatible with the most common traction-class-2 tractors.
- Dimension over outer wheel surfaces R22.5, mm (base configuration) MH 120
- Conveyor discharge height at 25-35° tilt, mm
- Dimension for calculating the feed-mixer width on the conveyor side in transport position, mm
- Dimension for calculating the feed-mixer width with the chute / conveyor in working position at maximum opening, mm
* When using R19.5 wheels, all height dimensions are reduced by 89 mm
Operating features of machines with horizontal augers